Mitutoyo Caliper Error Code E--05 2021 (2025)

If the error persists as you move the slider, there is likely debris on the beam.

. This occurs when the sensor loses its position tracking, often caused by electrical noise, a weak battery, or physical contamination on the scale. Common Causes Contamination mitutoyo caliper error code e--05

Always use a name-brand CR2032 (Sony, Panasonic, Murata). Avoid cheap bulk battery packs. One fresh battery can last two years. If the error persists as you move the

This may void your warranty. If the tool is under warranty, contact a Mitutoyo Service Center instead. 4. Check for Mechanical Damage If the error occurred after the tool was dropped: Common Causes Contamination Always use a name-brand CR2032

Mitutoyo Absolute calipers utilize an electromagnetic inductive sensor (ABS encoder) rather than older capacitive systems. The sensor reads a specialized pattern on the main scale to determine position.

However, while rapid movement is the most common cause, it is not the only cause. In some contexts, E--05 can also appear due to: